SNAX Creator-2 Configuration and Control Manual

INFO SESSION Command Displays
SCF Commands for SNAX Creator-2
117143 SNAX Creator-2 Configuration and Control Manual 4–27
INFO SESSION Detailed Display
This example shows the request for detailed information about all sessions defined to
a SNAX Creator-2 subsystem named $CREA:
INFO SESSION $CREA.* , DETAIL
The following detailed display is returned:
SNAX/CRE DETAILED INFO SESSION: $CREA.\NODE1.$NT21LN.#ZR00001
Method............ PATHWAY Appl Name......... C-MYPATH-PATHWAY
Program Name...... PROG1 Service Requested. MYPATH
Pathmon Name...... \SNAX.$P02 Requester......... #PATH
Printer Name......- Pathway Term...... 118-M14-001
Process Name......-
Start Time........ 26 Jan 1993, 7:17:36.607
SNAX/CRE DETAILED INFO SESSION: $CREA.\NODE1.$NT21LN.#ZR00000
Method............ SERVER Appl Name.......... C-SERV1
Server Name....... $FSER Service Requested.. SERV1
Requester......... #SERV
Start Time........ 26 Jan 1993, 7:17:59.886
SNAX/CRE DETAILED INFO SESSION: $CREA.\NODE1.$NT21LN1.#ZR00000
Method............ TACL Appl Name.......... C-MYTACL
TACL Process Name. \NODE1.$X652 Service Requested. MYTACL
Requester......... LUA004
Start Time........ 26 Jan 1993, 7:17:47.119
A dash (-) in the field value column indicates that a field is undefined.
For all methods, the following are displayed:
Method
is the method of interaction between the SNAX Creator-2 subsystem and the
application.
Start Time
is the time the session began.
Appl Name
is the name of the APPL object.
Requester
is the name of the requesting secondary logical unit (SLU).
For SNAX/XF, the SLU name is not defined, so the LU open name in the ADD
LU command in the SNAX/XF configuration is used.