SNAX Creator-2 Configuration and Control Manual

NAMES Command Displays

SCF Commands for SNAX Creator-2

117143 SNAX Creator-2 Configuration and Control Manual 4–37

NAMES Displays

The following example shows the display returned in response to the NAMES

command applied to APPL objects; similar displays occur for other objects. This

example requests information about all APPL objects under the control of the

SNAX Creator-2 subsystem named $CREA:

NAMES APPL $CREA.*

Note that the wild-card designator (*) is used in this command to designate the

selection of all objects of the specified type.

The following display is returned:

APPL

C-PATH C-PATH1 C-PATH2 C-SERV C-TACL C-ALL

The following example displays information for all objects controlled by the

SNAX Creator-2 subsystem named $CRTR:

NAMES SUBSYS $CRTR.*, SUB ALL

The following display is returned:

SUBSYS

$CRTR

APPL

C-PATH C-PATH1

CONNECTION

\NODE.$SSCP.#CREQ1-\NODE.$CRTR

ENTRY

MYPATH

SESSION

\NODE.$NT21LN.#ZR00000

$SSCP.#CREQ1