SNAX Creator-2 Configuration and Control Manual

START SU Command
SCF Commands for SNAX Creator-2
117143 SNAX Creator-2 Configuration and Control Manual 4–39
START SU Command The START SU command initiates the operation of an SU object. Successful
completion of the START SU command indicates that connections to the access
method are created, and that the SNAX Creator-2 subsystem is able to accept logon
requests. The default state after an ADD command completes with a successful open
is STARTED. START SU is a sensitive command.
START SU command syntax is as follows:
START [ /OUT file-spec / ] SU manager-name.object-name
[ , SEL [ NOT ] state ]
OUT
causes any SCF output generated for this command to be directed to the file
file-spec ; it is described in the Subsystem Control Facility (SCF) Reference Manual.
manager-name
is described in Section 3, “Objects for SNAX Creator-2.”
object-name
is an SU object name, as described in Section 3, “Objects for SNAX Creator-2.”
SEL
is described in the Subsystem Control Facility (SCF) Reference Manual.
state
is an SU object state, as described in Section 3, “Objects for SNAX Creator-2.”
Consideration
The SUB parameter is not supported.
Example
The following example illustrates the START SU command:
START SU $CREA.$SSCP.#SUB1, SEL STOPPED