SNAX Creator-2 Configuration and Control Manual

STATS SUBSYS Command
SCF Commands for SNAX Creator-2
4–40 117143 SNAX Creator-2 Configuration and Control Manual
STATS SUBSYS
Command
The STATS SUBSYS command displays statistical information for the SNAX Creator-2
subsystem. In addition, for each statistical counter returned, there is an associated
timestamp returned, which indicates when the sample was taken. STATS SUBSYS is a
sensitive command when used to reset statistics.
STATS SUBSYS command syntax is as follows:
STATS [ /OUT file-spec / ] SUBSYS manager-name [ , RESET ]
OUT
causes any SCF output generated for this command to be directed to the file
file-spec ; it is described in the Subsystem Control Facility (SCF) Reference Manual.
manager-name
is described in Section 3, “Objects for SNAX Creator-2.”
[ , RESET ]
if present, restores all the statistics counters to their initial values after the statistics
are displayed.
Consideration
The SUB and SEL parameters are not supported.