SNAX Creator-2 Configuration and Control Manual

STATS SUBSYS Command Display
SCF Commands for SNAX Creator-2
117143 SNAX Creator-2 Configuration and Control Manual 4–41
STATS SUBSYS Display
This example shows the request for statistics on the SNAX Creator-2 subsystem named
$CREA:
STATS SUBSYS $CREA
The following display is returned:
SNAX/CRE STATS SUBSYS: $CREA
Openers
-----------------------------------------------------------
Reset Time........ 26 Jan 1993, 9:29:14.565
Sample Time....... 26 Jan 1993, 9:13:20.191
Config Openers.... 17
Current Openers... 1
MAX Openers ...... 1
Receive Queue
-----------------------------------------------------------
Reset Time........ 26 Jan 1993, 9:29:14.565
Sample Time....... 26 Jan 1993, 9:13:20.191
Config RCV Depth.. 30
Current RCV Depth. 1
MAX RCV Depth..... 1
Memory Pool
-----------------------------------------------------------
Reset Time........ 26 Jan 1993, 9:29:14.565
Last Growth....... 26 Jan 1993, 9:09:22.692
Sample Time....... 26 Jan 1993, 9:13:20.191
Config MEM Pool........ 382976 MAX Fragments........ 0
Current MEM Pool....... 351916 Current Fragments.... 3
MAX Allocated.......... 351916 Fail Size............ 0
Growth Count........... 187
Reset Time
is the time one of the following events last occurred:
The statistics counters were reset by the RESET parameter of the STATS
command.
The subsystem was initiated.
A takeover by the backup process occurred.
Sample Time
is the time of the actual statistics sampling.
Config Openers
is the maximum number of OPEN requests maintained by the SNAX Creator-2
subsystem. This number includes both application and control openers.