SNAX Creator-2 Configuration and Control Manual

STATUS Command
SCF Commands for SNAX Creator-2
4–44 117143 SNAX Creator-2 Configuration and Control Manual
STATUS Command The STATUS command returns the current states of the objects.
STATUS command syntax is as follows:
STATUS [ /OUT file-spec / ]
{ APPL manager-name.object-name }
{ CONNECTION manager-name.object-name }
{ ENTRY manager-name.object-name }
{ SESSION manager-name.object-name }
{ SU manager-name.object-name }
{ SUBSYS manager-name }
[ , DETAIL ]
[ , SEL [ NOT ] state ]
[ , SUB [ { ALL | NONE | ONLY | subtype ] ]
OUT
causes any SCF output generated for this command to be directed to the file
file-spec ; it is described in the Subsystem Control Facility (SCF) Reference Manual.
manager-name
is described in Section 3, “Objects for SNAX Creator-2.”
object-name
is an APPL, CONNECTION, ENTRY, SESSION, or SU object name, as described in
Section 3, “Objects for SNAX Creator-2.”
DETAIL
and its values are standard for SCF and are described in the Subsystem Control
Facility (SCF) Reference Manual.
SEL
is described in the Subsystem Control Facility (SCF) Reference Manual.
state
is an APPL, CONNECTION, ENTRY, SESSION, SU, or SUBSYS object state, as
described in Section 3, “Objects for SNAX Creator-2.”
SUB
is described in the Subsystem Control Facility (SCF) Reference Manual.