SNAX/APC Application Programming Manual

About This Manual
SNAX/APC Application Programming Manual—138786
xii
SNAX/APC Manuals
SNAX/APC Manuals
In addition to this manual, the following Tandem manuals relate specifically to
SNAX/APC:
•
The SNAX/APC Configuration and Management Manual describes how to
configure and manage SNAX/APC.
•
The SNAX/APC Management Programming Manual provides information about
how to use the SPI and EMS network management interfaces to programmatically
interrogate, configure and control the SNAX/APC process, and interpret
SNAX/APC EMS event messages. Note that Section 6 of the SNAX/APC
Management Programming Manual is obsoleted by Appendix E in the SNAX/APC
Configuration and Management Manual.
•
The Operator Messages Manual describes the operator version of events. A section
of this manual describes SNAX/APC operator messages.
Other Tandem Manuals
The following Tandem manuals provide useful information and will be necessary when
configuring your underlying access method (SNAX/APN, SNAX/CDF, or SNAX/XF):
SNAX/APN Manuals (D-series Software)
•
SNAX/APN Configuration and Control Manual
•
SNAX/APN Management Programming Manual
•
SCF Reference Manual for SNAX/APN
SNAX/XF Manuals (D-series Software)
•
SNAX/XF Configuration and Control Manual
•
SNAX/XF Management Programming Manual
•
SCF Reference Manual for SNAX/XF
Combined Manuals (G-series Software)
•
SNAX/XF and SNAX/APN Configuration and Control Manual
•
SCF Reference Manual for SNAX/XF and SNAX/APN
SNAX/CDF Manuals
•
SNAX/CDF Configuration and Control Manual
•
SNAX/CDF Management Programming Manual
•
SCF Reference Manual for SNAX/CDF