SNAX/APC Application Programming Manual

Verb Definitions
SNAX/APC Application Programming Manual—138786
3-89
DISPLAY-STATUS Verb
FSM-BIS
This field indicates the Bracket Initiation Stopped (BIS) protocol. Use the DSR-
SESSION-POLARITY field to determine which BIS FSM is in use. The values
are:
01 Reset
02 BIS Sent
03 BIS Received
04 Closed
FSM-BSM
indicates the bracket states. The possible values are:
01 Between Brackets
02 In Brackets
FSM-CHAIN-RCV
indicates the received chain states. The possible values are:
01 Between Chains
02 In Chains
03 Negative Response Sent
04 Pending Response
05 Pending Send Reply
FSM-CHAIN-SEND
indicates the sending chain states. The possible values are:
01 Between Chains
02 In Chains
03 Negative Response Sent
04 Pending Response
05 Pending Send Reply
FSM-CONVERSATION
indicates the conversation status. The possible values are:
01 Reset
02 Send
03 Receive
04 Received Confirm
05 Received Confirm Send
06 Received Confirm Deallocate
07 Prepare to Receive Defer
08 Deallocate Defer
09 Pending Deallocate
10 End Conversation