SNAX/APC Application Programming Manual

Verb Definitions
SNAX/APC Application Programming Manual—138786
3-97
TP-END Verb
•
A TP can concatenate TP-END with other UOWs in an IPC message. However, TP-
END must be the last UOW in the IPC message. (The only UOW that a TP can
request after a TP-END is TP-READY; TP-READY must be sent in its own IPC
message.)
•
If a TP-END verb is processing when SNAX/APC receives a CANCEL system
message from the application program, the TP-END verb is allowed to finish
normally.