SNAX/APC Application Programming Manual

Application Prototype Simulator

SNAX/APC Application Programming Manual—138786

4-2

APS User Interface

APS presents SNAX/APC verbs to you by using full-screen forms, one form for each

verb. The following example shows the general layout of an APS form.

The following areas of the form are identified:

1. The name of the SNAX/APC verb that you have selected is displayed in this field.

2. The resource ID returned by the last TP-READY verb is displayed here. If you have

not yet issued a TP-READY verb, or a TP-READY verb has not yet completed, all

zeros are displayed.

3. The fields for the input to the verb request are displayed here. This is where you

enter the information required by the verb.

4. The reply fields from the verb are displayed here after the verb has been executed by

SNAX/APC.

5. This is the APS menu. You select the verb you want to execute by pressing the

corresponding function key. The labels on the top row correspond to the unshifted

function keys, and those on the bottom row correspond to the shifted function keys.

The menu choices will reflect either the use of basic or mapped verbs, depending on

the choice you make when first issuing a TP-READY verb.

SNAX/APC Application Prototype Simulator (APS) System (T9096D30 22JUN95 F15)

Request:

1 Resource ID: 2

Reply:

Enter input (if any), then press SEND to issue request

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15

F16

TPR MAl MDal TPE MR&W MRTS MSD MSE MCnf MCfd MGA Snd Prnt Hex Rcov

Exit

ActS Dact MPrc MRcI MFls Gtyp GTP A(T) E(T)

Exit