SNAX/APC Application Programming Manual

Application Prototype Simulator
SNAX/APC Application Programming Manual—138786
4-49
MC-FLUSH (F10)
MC-FLUSH (F10)
The MC-FLUSH verb transmits the contents of the local LU’s Send buffer to the partner
TP. The verb completes when the buffer has been transmitted. If no information is in
the buffer, nothing is transmitted to the partner TP, and the verb completes immediately.
Request Fields
The request field for the MC-FLUSH verb screen has no operator input.
Reply Fields
IPC Return Code
displays the value of HEADER-RETURN-CODE returned in the IPC header reply.
IPC Return Code Detail
displays the value of HEADER-RETURN-CODE-DETAIL returned in the IPC
header reply.
UOWs In
displays the number of UOWs in this IPC message (always 1 for APS).
UOWs Out
for APS, this value is always 1. UOWs Out indicates the number of reply UOWs
contained in the reply from SNAX/APC.
SNAX/APC Application Prototype Simulator (APS) System (T9096D30 22JUN95 F15)
Request: MC_Flush Resource ID: 0 6 0 0707D
Reply: MC_Flush
IPC Return Code: 0 IPC Ok
IPC Return Code Detail: 0 IPC Ok
UOWs In: 0001 UOWs Out: 0001
Header Return Code: 0 RC Ok
Request Completed
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
F16
TPR MAl MDal TPE MR&W MRTS MSD MSE MCnf MCfd MGA MSnd Prnt Hex Rcov
Exit
ActS Dact MPrc MRcI MFls Gtyp GTP A(T) E(T)
Exit