SNAX/APC Application Programming Manual

Application Prototype Simulator
SNAX/APC Application Programming Manual—138786
4-51
MC-GET-ATTRIBUTES (F11)
MC-GET-ATTRIBUTES (F11)
The MC-GET-ATTRIBUTES verb queries the SNAX/APC process for information
about the current, specified conversation This verb does not send anything to the partner
LU; the returned information is retrieved locally. The MC-GET-ATTRIBUTES verb
completes immediately.
The local TP (APS) must be in a conversation before it can issue the MC-GET-
ATTRIBUTES verb. If the MC-GET-ATTRIBUTES verb is issued while no
conversation is active, the reply returns an Invalid Resource ID (IPC Return Code 2)
error.
Request Fields
The request field for the MC-GET-ATTRIBUTES verb screen has no operator input.
Reply Fields
IPC Return Code
displays the value of HEADER-RETURN-CODE returned in the IPC header reply.
IPC Return Code Detail
displays the value of HEADER-RETURN-CODE-DETAIL returned in the IPC
header reply.
UOWs In
displays the number of UOWs in this IPC message (always 1 for APS).
SNAX/APC Application Prototype Simulator (APS) System (T9096D30 22JUN95 F15)
Request: MC_Get_Attributes Resource ID: 0 5 0 0707D
Reply: MC_Get_Attributes
IPC Return Code: 0 IPC Ok
IPC Return Code Detail: 0 IPC Ok
UOWs In: 0001 UOWs Out: 0001
Header Return Code: 0 RC Ok
APC LU Name: LUP01 Mode Name:
Partner LU Name: LUS01 Sync Level: C
Partner Uninterpreted Name: LUS01 Session Identifier: 0001
Request Completed
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
F16
TPR MAl MDal TPE MR&W MRTS MSD MSE MCnf MCfd MGA MSnd Prnt Hex Rcov
Exit
ActS Dact MPrc MRcI MFls Gtyp GTP A(T) E(T)
Exit