SNAX/APC Application Programming Manual

Interprocess Communications and Units of Work
SNAX/APC Application Programming Manual—138786
2-19
UOW Return Codes
1013 RC-SVC-ERROR-
PURGING
The remote TP issued a SEND-ERROR (SVC) verb
from receive or confirm state. The local TP enters
Receive state. The SEND-ERROR verb purges any
information sent to the remote TP but not yet
received by the remote TP.
1014 RC-SVC-ERROR-
TRUNC
The remote TP started to send a logical record and
then issued a SEND-ERROR (SVC) verb before
sending the complete logical record. The local TP
enters Receive state.
1015 RC-
UNSUCCESSFUL
The ALLOCATE verb was unable to allocate a
conversation. The state of the conversation is not
changed. This RC may also indicate that a TP has
issued an (MC)RECEIVE-IMMEDIATE and no data
or control information was available.
1016 RC-DEALLOCATE-
ABEND
The conversation was terminated by the remote TP
or SNAX/APC because it detected an error that
would not allow successful completion of the
conversation. Use the REP-RETURN-CODE-
DETAIL field to determine the reason for the
deallocation.
1017 RC-MAP-NOT-
FOUND
SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
1018 RC-MAP-
EXECUTION-
FAILURE
SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
1019 RC-MAP-
SUCCESSFUL
SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
1021 RC-MAPPING-NOT-
SUPPORTED
SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
1022 RC-MAP-
UNSUCCESSFUL
SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
1024 RC-MAP-NULL SNAX/APC does not support data mapping. If a
remote TP attempts data mapping or passes these
return codes SNAX/APC will merely pass them on
to the local TP.
Table 2-3. UOW Return Codes (page 3 of 4)
Value Label Meaning