SNAX/APC Configuration and Management Manual

Configuring Network Resources for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
4-24
Descriptions of the SNA-defined Modes
SNASVCMG PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“SNASVCMG” is the object name of the
SNASVCMG PTNR-MODE in a SNAX/APC subsystem. It is architected for the use of
the CNOS operation, and has been implemented in SNAX/APC.
Default PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#DEFAULT” is the object name of the
default PTNR-MODE in a SNAX/APC subsystem. It could be used by any Application
Transaction Programs (ATP). It has the following default attribute values:
•
MODENAME = “ ” (eight blanks)
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 3
SENDWINDOW = 3
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
#BATCH PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#BATCH” is the object name of the
#BATCH PTNR-MODE in a SNAX/APC subsystem. It could be used by any
Application Transaction Programs (ATP). It has the following default attribute values:
•
MODENAME = “#BATCH”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 3
SENDWINDOW = 3
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
#INTER PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#INTER” is the object name of the #INTER
PTNR-MODE in a SNAX/APC subsystem. It could be used by any Application
Transaction Programs (ATP). It has the following default attribute values:
•
MODENAME = “#INTER”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 7
SENDWINDOW = 7
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE