SNAX/APC Configuration and Management Manual

Configuring Network Resources for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
4-25
Control and Management
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
#BATCHSC PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#BATCHSC” is the object name of the
#BATCHSC PTNR-MODE in a SNAX/APC subsystem. It could be used by any
Application Transaction Programs (ATP). It has the following default attribute values:
•
MODENAME = “#BATCHSC”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 3
SENDWINDOW = 3
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
#INTERSC PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#INTERSC” is the object name of the
#INTERSC PTNR-MODE in a SNAX/APC subsystem. It could be used by any
Application Transaction Programs (ATP). It has the following default attribute values:
•
MODENAME = “#INTERSC”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 7
SENDWINDOW = 7
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
CPSVCMG PTNR-MODE
Because SNAX/APC subsystem does not support CP-CP sessions, there will be no
CPSVCMG PTNR-MODE added. An attempt to add such a PTNR-MODE will be
rejected with ZAPC^ERR^DEFT^OBJNAME. The CP-CP sessions will be supported
in SNAX/APN.
Control and Management
These automatically configured PTNR-MODE objects may be managed by the
following commands using the SCF interactive interface or SPI programming interface:
ALTER Command
For SNASVCMG PTNR-MODE, only DEFAULTMAXINRUSIZE and
DEFAULTMAXOUTRUSIZE attributes of can be changed. For the rest of the SNA-