SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-6
LENGTH Command
Example
HTRACE produces the following sample output :
LENGTH Command
Use the LENGTH command to set the length (in bytes) of hexadecimal data for each
record.
Considerations
•
A warning message will appear if the hexadecimal data is truncated.
•
This command is useful if you wish to process a summary review of the trace file.
LOAD Command
Use the LOAD command to load APCLMAP tables.
Example
The following command shows a qualified path, with the file name APCLMAP.
FMT> LOAD $FIELD.APCF10.APCLMAP
DIN/BOUT ------------------ B E G I N ------------------ DOUT/BIN
TP READY ======> 808
<------ RQ FMH-5 BB OIC DR 00A3 81B
<====== TP READY 869
RECEIVE AND WAIT ======> 86B
<====== RECEIVE AND WAIT 8A7
REQUEST TO SEND ======> 8A9
RQ DFC SIG DR 00A3 ------> 8C9
<------ +RP DFC SIG 00A3 8D0
<====== REQUEST TO SEND 900
RECEIVE AND WAIT ======> 902
<====== RECEIVE AND WAIT 930
CONFIRMED ======> 932
+RP FMD 00A3 ------> 95A
<====== CONFIRMED 96E
RECEIVE AND WAIT ======> 970
<------ RQ DFC LUSTAT ER CD 00A4 989
<====== RECEIVE AND WAIT 9CA
SEND DATA ======> 9CC
<====== SEND DATA 9F2
CONFIRM ======> 9F4
RQ FMD OIC DR 00A4 ------> A19
<------ +RP FMD 00A3 A20
<====== CONFIRM A4C
DEALLOCATE ======> A4E
RQ FMH-7 OIC DR CEB 00A5 ------> A81
<====== DEALLOCATE A9E
TP END ======> AA3
<====== TP END AC6
L[ENGTH] integer
LOAD <apclmap file name>