SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-7
NEXT Command
NEXT Command
Use the NEXT command to format the next sequential trace record(s).
Consideration
You can use the function keys to format subsequent sequential records, as follows:
RANGE Command
Use the RANGE command to set the first and last records in a range of trace records for
which all subsequent commands apply.
ALL
specifies all trace records meeting the criteria specified in the SELECT command.
begin
specifies the first record. You can specify either an integer value or the keyword
FIRST (which can be abbreviated to F).
end
specifies the last record to select. You can specify either an integer value or the
keyword LAST (which can be abbreviated to L). If you omit end, the trace analysis
program selects only the first record specified.
N[EXT] [ integer ]
Function Key Formats the Next Function Key Formats the Next
F1 record F9 16 records
F2 2 records F10 18 records
F3 4 records F11 20 records
F4 6 records F12 22 records
F5 8 records F13 24 records
F6 10 records F14 26 records
F7 12 records F15 28 records
F8 14 records F16 30 records
R[ANGE] { A[LL] }
{ begin [, end] }