SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-27
Error Version (Trace Format)
0864 tells us that this is a premature conversation termination. A definite response is
requested.
SNAX/APC sends this definite response and will now begin to shut down the
conversation on the local side.
In response to the CONFIRM request, the local TP is sent a UOW return code of 1002.
This means RC-DEALLOCATE-ABEND-PROG—the conversation was terminated by
the remote TP or SNAX/APC because it detected an error that would not allow
successful completion of the conversation. Use the REP-RETURN-CODE-DETAIL
==============================================================================
<BOUT> @mucb 853774 seq: 375 05/13/92 11:40:08.03
mucb:
OCB ID: %H0000
LU ID: %H0002; SESSION ID: %H0007
TPI ID: %H0071; CONV ID: %H0045
000D070E 000D070E 004F0001 00020007 00450071
00070000 00000000 00000000 00101501 07000000
80000000 00000000 00000000
biu: SRPL SEND
SRPL=001B 0000 0000014E 00000000 00000000 0000 0000 0000 000E
RH=838000 +RSP FMD BCI ECI DR1
==============================================================================
<DOUT> @mucb 849814 seq: 431 05/13/92 11:40:08.07
mucb:
OCB ID: %H0008
LU ID: %H0002; SESSION ID: %H0007
TPI ID: %H0071; CONV ID: %H0045
000CF796 000CF796 00520002 00020007 00450071
00070000 0008000C F41A0000 00112500 00000000
00000000 00000000 0000001E
IPC HEADER:
request: UOWS-WITH-ERROR (2)
version: S2
return code: OK (0)
retn detail: OK (0)
rid: %H0039, %H0000, %H9438
uows in: 1
uows out: 1
00025332 00000000 00390000 94380001 00010000 [..S2.....9...8......]
UOWs:
verb: CONFIRM
uow id: 1332
return code: 1002
retn detail: 0000
535403EA 03EA0000 004E [ST.......N]