SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-31
Error Version (Trace Format)
SNAX/APC sends a positive response.
SNAX/APC receives a TP-READY request from the remote LU. There will be no
response until an ATTACH request is received.
The conversation is initiated when SNAX/APC receives an ATTACH request from the
local TP.
At the RH level you can tell this is an ATTACH request because the function
management data (FMD) bit is on, and FI is also on. The first byte shows the length in
bytes: 15. The second byte shows the data type: 05. The next word, 02FF, is the
ATTACH command code. (Note that because the message is longer than 15 bytes, some
==============================================================================
<DIN> @mucb 849342 seq: 58 05/13/92 11:40:03.17
sync 1
mucb:
OCB ID: %H0008
LU ID: %H0000; SESSION ID: %H0000
TPI ID: %H0000; CONV ID: %H0000
000CF5BE 000CF5BE 00660000 00000000 00000000
00000000 0008000C D9560000 00000000 00000000
00000000 00000000 00000032
IPC HEADER:
request: STOP-ON-ERROR (-2)
version: S2
rid: %H0000, %H0000, %H0000
uows in: 01
uows out: 00
FFFE5332 00000000 00000000 00000001 00000000 [..S2................]
UOWs:
req : TP READY
uow id: 1332
53540BBD 4E4E4C55 50303120 20205052 4F475030 [ST..NNLUP01 PROGP0]
31413030 31202020 2020 [1A001 ]
==============================================================================
<BIN> @mucb 850074 seq: 85 05/13/92 11:40:04.75
mucb:
OCB ID: %H0000
LU ID: %H0002; SESSION ID: %H0004
TPI ID: %H0000; CONV ID: %H0000
000CF89A 000CF89A 00740001 00020004 00000000
00040000 00000000 00000000 00000000 00000000
00000000 00000000 00000025
biu: SRPL RECEIVE SPECIFIC
SRPL=001B 0001 0000014D 00040000 60000000 0148 0000 0000 000F
RH=0B2000 REQ FMD FI BCI ECI DR2
150502FF 0003D000 400BD7D9 D6C7D7F0 F1C1F0F0 [......}. .PROGP01A00]
F1001012 FF746573 74206461 74612023 31 [1.........././...]