SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-32
Error Version (Trace Format)
data has been sent as well as the header—there is a GDS variable with a length of 0010
and an ID of 12FF, for example.)
SNAX/APC can now respond to the TP-READY request sent by the remote TP. The
remote TP is placed in Receive state.
Note that SNAX/APC has assigned values to the three resource IDs (RID), and a
conversation ID (CONV ID) is assigned—as well as session IDs, LU IDs, and so on.
Assigning values shows that SNAX/APC recognizes the existence of the remote TP.
This recognition will change later on in the trace.
==============================================================================
<DOUT> @mucb 849446 seq: 153 05/13/92 11:40:04.82
mucb:
OCB ID: %H0008
LU ID: %H0002; SESSION ID: %H0004
TPI ID: %H0040; CONV ID: %H006F
000CF626 000CF626 00520002 00020004 006F0040
00040000 0008000C D9560000 00110000 00000000
00000000 00000000 0000001E
IPC HEADER:
request: ALL-UOWS-OK (0)
version: S2
return code: OK (0)
retn detail: OK (0)
rid: %H0038, %H0000, %H99A6
uows in: 1
uows out: 1
00005332 00000000 00380000 99A60001 00010000 [..S2.....8..........]
UOWs:
req : TP READY
uow id: 1332
return code: 0000
retn detail: 0000
53540BBD 00000000 [ST......]
==============================================================================
<DIN> @mucb 849450 seq: 155 05/13/92 11:40:05.35
sync 2
mucb:
OCB ID: %H0008
LU ID: %H0002; SESSION ID: %H0004
TPI ID: %H0040; CONV ID: %H006F
000CF62A 000CF62A 00500000 00020004 006F0040
00040000 0008000C D9560000 00000000 00000000
00000000 00000000 0000001C
IPC HEADER:
request: STOP-ON-ERROR (-2)
version: S2
rid: %H0038, %H0000, %H99A6
uows in: 01
uows out: 00
FFFE5332 00000000 00380000 99A60001 00000000 [..S2.....8..........]
UOWs:
verb: RECEIVE AND WAIT
uow id: 1332
535403EE 004C0190 [ST...L..]