SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-36
Error Version (Trace Format)
These sense data (SDI) and function management data (FMD) codes have already been
covered in the discussion of the local TP and SNAX/APC trace, earlier in this section.
==============================================================================
<DIN> @mucb 849454 seq: 359 05/13/92 11:40:06.60
sync 4
mucb:
OCB ID: %H0008
LU ID: %H0000; SESSION ID: %H0000
TPI ID: %H0000; CONV ID: %H0000
000CF62E 000CF62E 004C0000 00000000 00000000
00000000 0008000C D7BA0000 00000000 00000000
00000000 00000000 00000018
IPC HEADER:
request: STOP-ON-ERROR (-2)
version: S2
rid: %H0000, %H0000, %H0000
uows in: 01
uows out: 00
FFFE5332 00000000 00000000 00000001 00000000 [..S2................]
UOWs:
req : TP END
uow id: 1332
53540BBE [ST..]
==============================================================================
<DOUT> @mucb 849378 seq: 370 05/13/92 11:40:06.61
mucb:
OCB ID: %H0008
LU ID: %H0000; SESSION ID: %H0000
TPI ID: %H0000; CONV ID: %H0000
000CF5E2 000CF5E2 00480002 00000000 00000000
00000000 0008000C D7BA0000 00110000 00000000
00000000 00000000 00000014
IPC HEADER:
request: REQ-ERROR (3)
version: S2
return code: INVALID-RESOURCE-ID (2)
retn detail: OK (0)
rid: %H0000, %H0000, %H0000
uows in: 1
uows out: 0
00035332 00020000 00000000 00000001 00000000 [..S2................]