SNAX/APC Configuration and Management Manual

Trace Analysis Program
SNAX/APC Configuration and Management Manual—138787
5-37
Error Version (Trace Format)
The remote TP attempts to send a TP-END request but SNAX/APC no longer
recognizes the existence of that TP. See the relevant information on the UOW detail
code on the previous page.
The SNAX/APC program is terminated.
If you want to follow traces at the RH level as well as the UOW reply code level, consult
IBM’s SNA Reference Summary Manual and LU 6.2 Reference: Peer Protocols.
==============================================================================
<OPENER> seq: 372 05/13/92 11:40:06.75
type: CLOSE
ocb id: %H0008; protocol: APPL
opener name: \ABCD2.$Y659
5C534E41 58322E24 59363539
==============================================================================
<BIN> @mucb 841986 seq: 378 05/13/92 11:40:08.19
mucb:
OCB ID: %H0000
LU ID: %H0002; SESSION ID: %H0004
TPI ID: %H0040; CONV ID: %H0000
000CD902 000CD902 004F0001 00020004 00000040
00040000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
biu: SRPL RECEIVE ANY
SRPL=001B 0001 0000014D 00040000 12000000 014B 0000 0000 000E
RH=838000 +RSP FMD BCI ECI DR1
==============================================================================
<BOUT> @mucb 842154 seq: 385 05/13/92 11:40:08.19
mucb:
OCB ID: %H0000
LU ID: %H0002; SESSION ID: %H0000
FMT> exit