SNAX/APC Configuration and Management Manual

Objects for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
7-7
SESSION Object
partner-mode
is the name of the PTNR-MODE object. The name may consist of one to eight
characters, the first of which must be a letter. The name must be unique for a given
partner LU.
SNASVCMG is a reserved word for the default PTNR-MODE object for change
number of sessions (CNOS) operations. In the case of a request for parallel sessions
SNAX/APC expects to receive this mode name first, before accepting any other
mode names to establish session characteristics.
The following mode names are also reserved: CPSVCMG ‘” ‘”(#default),
#INTER, #INTERSC, #BATCH, and #BATCHSC.
Examples
The following are valid object names for the PTNR-MODE object:
$APC1.LU01.CICSLU62.LU62BIND
$APC1.TDMLU001.CICSLU62.LU62BIND
SESSION Object
The SESSION object type describes an LU-LU session known to the SNAX/APC
process. Sessions provide channels for conducting conversations.
Naming Conventions
The object name for the SESSION object is session-id, and it has the following
format:
$apc-process
is the name of the SNAX/APC process.
local-lu
is the name of the local LU.
partner-lu
is the name of the partner LU.
partner-mode
is the name of the partner mode.
$apc-process.local-lu.partner-lu.partner-mode.session-id