SNAX/APC Configuration and Management Manual

Contents
SNAX/APC Configuration and Management Manual—138787
xvii
Tables
Figures (continued)
Figure 6-1. SCF Overview 6-2
Figure 7-1.
Object Type Hierarchical Relationships 7-1
Figure 7-2.
The CONV States 7-11
Figure 7-3.
The LU States 7-12
Figure 7-4.
The PROCESS States 7-13
Figure 7-5.
The PTNR-LU States 7-14
Figure 7-6.
The PTNR-MODE States 7-16
Figure 7-7.
The SESSION States 7-20
Figure 7-8.
The TPN States 7-21
Figure 7-9.
The TPI States 7-22
Figure A-1.
LU 6.2 Functions and Option Set Numbering A-4
Tables
Table 2-1. SNAX/APC and APPC/PC LU Parameters 2-7
Table 3-1.
Contents of Distribution Tape 3-1
Table 3-2.
Entry Records 3-3
Table 3-3.
Code Conditions 3-3
Table 3-4.
Bit Position and Object Type 3-15
Table 5-1.
APCTAP Commands 5-2
Table 6-1.
Object States 6-6
Table 7-1.
SNAX/APC Object Specifications 7-2
Table 7-2.
Object States for Each Object Type 7-10
Table 8-1.
Command Overview 8-1
Table 8-2.
Command and Object Type Summary 8-3
Table A-1.
Basic Conversation Verbs A-1
Table A-2.
Mapped Conversation Verbs A-2
Table A-3.
Type Independent Verbs A-2
Table A-4.
Control Operator Verbs A-3
Table A-5.
Verb Options A-4
Table D-1.
CNOS Verbs Versus SNAX/APC SCF Commands and Attributes D-1
Table D-2.
Session Control Verbs Versus SNAX/APC SCF Commands and
Attributes D-2