SNAX/APC Configuration and Management Manual

Objects for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
7-18
Considerations for Dynamically-Added and Parallel-
Session PTNR-MODE Objects
Application Transaction Programs (ATP). It has the following default attribute
values:
MODENAME = “#BATCH”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 3
SENDWINDOW = 3
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
•
#INTER PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#INTER” is the object name of the
#INTER PTNR-MODE in a SNAX/APC subsystem. It could be used by any
Application Transaction Programs (ATP). It has the following default attribute
values:
MODENAME = “#INTER”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 7
SENDWINDOW = 7
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
•
#BATCHSC PTNR-MODE $<apc-process>.<local-LU>.<partner-
LU>.“#BATCHSC” is the object name of the #BATCHSC PTNR-MODE in a