SNAX/APC Configuration and Management Manual

Objects for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
7-19
SESSION States
SNAX/APC subsystem. It could be used by any Application Transaction Programs
(ATP). It has the following default attribute values:
MODENAME = “#BATCHSC”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 3
SENDWINDOW = 3
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
•
#INTERSC PTNR-MODE
$<apc-process>.<local-LU>.<partner-LU>.“#INTERSC” is the object name of the
#INTERSC PTNR-MODE in a SNAX/APC subsystem. It could be used by any
Application Transaction Programs (ATP). It has the following default attribute
values:
MODENAME = “#INTERSC”
DEFAULTMAXSESSION = 8
DEFAULTMINCOWINNER = 4
DEFAULTMINCOLOSER = 4
MAXAUTOACT = 0
RCVWINDOW = 7
SENDWINDOW = 7
DEFAULTMAXINRUSIZE = process’ MAXINRUSIZE
DEFAULTMAXOUTRUSIZE = process’ MAXOUTRUSIZE
•
CPSVCMG PTNR-MODE
Because the SNAX/APC subsystem does not support CP-CP sessions, there will be
no CPSVCMG PTNR-MODE added. An attempt to add such a PTNR-MODE will
be rejected with ZAPC^ERR^DEFT^OBJNAME. The CP-CP sessions are be
supported in SNAX/APN.
SESSION States
The following describes the states of the SESSION object.
1. The SESSION object is created by the ADD SESSION command or by an
ACTIVATE_SESSION verb, which places the SESSION object in the STARTING
state.