SNAX/APC Configuration and Management Manual

SNAX/APC Configuration and Management Manual—138787

xix

What’s New in This Manual

Manual Information

Abstract

SNAX/APC provides LU type 6.2 support for the Tandem implementation of SNA. This

manual describes how to install and configure SNAX/APC.

Product Version

SNAX/APC D41.00

Supported Releases

This manual supports G06.00 and all subsequent releases until otherwise indicated in a

new edition.

Document History

New and Changed Information

The SNAX/APC Configuration and Management Manual is new; it was created by

combining two earlier manuals. Part I contains the sections of the SNAX/APC Planning

and Configuration Manual and Part II contains Sections 1, 2, and 3 from the SCF

Reference Manual for SNAX/APC and they are renamed Sections 6, 7, and 8,

respectively. In the appendices, Appendix A is carried forward from the SNAX/APC

Planning and Configuration Manual and Appendices A, B, C, and D from the SCF

Reference Manual for SNAX/APC have been carried forward and renamed Appendix B,

C, D, and E, respectively.

Part Number Published

138787 May 1998

Part Number Product Version Published

123140 SNAX/APC D40 February 1997

134230 SNAX/APC F40 May 1997

134978 SNAX/APC D41

July 1997

136054 SNAX/APC D41 August 1997

138787 SNAX/APC D41 May 1998

New editions incorporate any updates issued since the previous edition.

A plus sign (+) after a release ID indicates that this manual describes function added to the base release, either

by an interim product modification (IPM) or by a new product version on a .99 site update tape (SUT).