SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-39
ASSUME CONV Command
Object Specification
The object specification for the SNAX/APC ASSUME command is:
Considerations
•
When an SCF session begins, the assumed object type is null.
•
If the object type is omitted and an object name is specified, the default object type
remains unchanged. Similarly, if an object type is specified and the object name is
omitted, the default object name remains unchanged. If both object type and object
name are omitted, the assumed object type and object name become null.
ASSUME CONV Command
The ASSUME CONV command sets the CONV object as the default object type for
subsequent commands, and optionally, sets the default object name.
Examples
-> ASSUME PROCESS $APC1
-> ASSUME CONV LU01.ACCT.003A.0030
ASSUME LU Command
The ASSUME LU command sets the LU object as the default object type for subsequent
commands, and optionally, sets the default object name.
Examples
-> ASSUME LU $APC1.LU01
-> ASSUME LU LU01
-> ASSUME LU
ASSUME PROCESS Command
The ASSUME PROCESS command sets the PROCESS object as the default object type
for subsequent commands, and optionally, sets the default object name.
object-type object name representation
CONV conv-id
LU local-lu
PROCESS apc-process
PTNR-LU partner-lu
PTNR-MODE partner-mode
SESSION session-id
TPI tpi
TPN tpn