SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-40
ASSUME PTNR-LU Command
Example
-> ASSUME PROCESS $APC1
ASSUME PTNR-LU Command
The ASSUME PTNR-LU command sets the PTNR-LU object as the default object type
for subsequent commands, and optionally, sets the default object name.
Examples
-> ASSUME PTNR-LU $APC1.LU01.CICSLU62
-> ASSUME PTNR-LU
ASSUME PTNR-MODE Command
The ASSUME PTNR-MODE command sets the PTNR-MODE object as the default
object type for subsequent commands, and optionally, sets the default object name.
Examples
-> ASSUME PTNR-LU $APC1.LU01.CICSLU62
-> ASSUME PTNR-MODE LU62BIND
ASSUME SESSION Command
The ASSUME SESSION command sets the SESSION object as the default object type
for subsequent commands, and optionally, sets the default object name.
Examples
-> ASSUME PROCESS $APC1
-> ASSUME LU LU01
-> ASSUME SESSION CICSLU62.LU62BIND.0015
-> INFO
-> ASSUME SESSION $APC1.LU01.CICSLU62.LU62BIND.0015
-> STATS
ASSUME TPI Command
The ASSUME TPI command sets the TPI object as the default object type for
subsequent commands, and optionally, sets the default object name.
Examples
-> ASSUME PROCESS $APC1
-> ASSUME TPI ACCT.003A