SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-44
INFO CONV Command
Object Specification
The object specification for the SNAX/APC INFO command is:
Considerations
•
The SUB parameter cannot be used with the INFO SESSION or INFO CONV
command-object pairs.
•
Asterisks (*) in the returned displays denote attributes that can be altered with the
ALTER command.
•
The INFO command displays configuration information about an object’s attributes.
To display dynamic information, such as an object’s summary state, use the
STATUS command.
INFO CONV Command
The INFO CONV command displays the current attribute settings of the specified
conversation.
INFO CONV Nondetailed Display
This example shows the request for nondetailed information about the current
conversation:
-> INFO CONV $AP01.LUP.ACCT.030C.0286
The following display is returned in response to this request:
CONV Name
displays the conversation name.
object-type object name representation
CONV conv-id
LU local-lu
PROCESS apc-process
PTNR-LU partner-lu
PTNR-MODE partner-mode
SESSION session-id
TPI tpi
TPN tpn
SNAX/APC INFO CONV:
CONV Name Conv Type Sync Level
-----------------------------------------------------------
$AP01.LUP.ACCT.030C.0287 Basic Confirm