SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-45
INFO CONV Command
CONV Type
displays the type of conversation - basic or mapped - that is allocated to start the
transaction program.
Sync Level
indicates the supported synchronization level of the active conversation. This field
contains None if a synchronization level is not supported, Confirm if the Confirm
synchronization level is supported or Syncpt if the Syncpt synchronization level is
supported.
INFO CONV Detailed Display
This example shows the request for detailed information about the current conversation:
-> INFO CONV $APC1.LU01.ACCT1.003A.0030
The following display is returned in response to this request:
Resource ID
displays in hexadecimal the identifier used by SNAX/APC to identify the
conversation and its resources.
Conversation Type
displays the type of conversation - basic or mapped - that is allocated to start the
transaction program.
CharMapping
indicates whether character translation will occur for this mapped conversation.
YES indicates that character translation will occur. NO indicates that character
translation will not occur.
CharMap Name
indicates the translation table which SNAX/APC uses to perform character
translation for this conversation.
SNAX/APC DETAILED INFO CONV: $APC1.LU01.ACCT.003A.0030
Resource ID ....... %H003A 0000 EC83 Session ID .....
%H000F
Conversation Type.. Mapped Sync Level .....
Syncpt
CharMapping ....... YES
CharMap Name ...... SPANISH
CharMap Note ...... Translation tables for Spanish