SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-46
INFO LU Command
CharMap Note
returns a description of the character translation table. It is obtained from the
character map file and is present only if the default translation table for the
SNAX/APC process is not the standard ASCII-to-EBCDIC translation.
Session ID
identifies the session on which this conversation is running.
Sync Level
indicates the supported synchronization level of the active conversation. This field
contains None if a synchronization level is not supported, Confirm if the Confirm
synchronization level is supported or Syncpt if the Syncpt synchronization level is
supported.
Consideration
•
The SUB parameter cannot be used with this command-object pair.
INFO LU Command
The INFO LU command displays the current attribute settings of the target LU.
INFO LU Nondetailed Display
This example shows the request for nondetailed information about the LU named LUP:
-> INFO LU $AP01.LUP
The following display is returned in response to this request:
LU Name
is the name of the local LU.
SNAName
displays the name of the local LU as it is known in the SNA network. The
SNAName is used for building SNA requests (such as the session activation BIND
request).
SNAX/APC INFO LU:
LU Name *SNAName *SNAX *Max *Auto
FileName Sess Start
-------------------------------------------------------------
$AP01.LUP LUP \TSNA.$T21A.#LUP 1024 NO
Note. Attributes marked with an asterisk (
*
) can be altered using the ALTER command.