SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-49
INFO PROCESS Command
INFO PROCESS Command
The INFO PROCESS command displays the current attribute settings of the SNAX/APC
process.
INFO PROCESS Nondetailed Display
This example shows the request for nondetailed information about the SNAX/APC
process named $APC1:
-> INFO PROCESS $APC1
The following display is returned in response to this request:
Name
displays the name of the SNAX/APC process.
Backup CPU
displays whether a backup process exists and, if so, gives the number of the CPU in
which the backup process is running.
Backup Debug
displays ON or OFF, depending upon whether or not a backup process enters the
debug mode on initialization.
Debug on Error
displays ON or OFF, depending upon whether or not the primary process is
configured to go into debug mode upon detection of a serious error that causes
SNAX/APC to abend.
INFO PROCESS Detailed Display
This example shows the request for detailed information about the SNAX/APC named
$APC1:
-> INFO PROCESS $APC1, DETAIL
SNAX/APC INFO PROC:
Name Backup Backup Debug
CPU Debug on Error
--------------------------------------
$APC1 12 OFF OFF