SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-51
INFO PROCESS Command
Backup CPU
displays whether a backup process exists and, if so, gives the number of the CPU in
which the backup process is running.
Debug on Error
displays ON or OFF, depending upon whether or not the primary process is
configured to go into debug mode upon detection of an error that causes the APC
process to abend.
*CharMap File Name ....... \TSNA.$SYSTEM.SYSTEM.ZCHARMAP
CharMap File Last Modif . 22 Apr 1991, 12:26:51.080
CharMap File Banner ..... COM-KRNL/BUILD CHARMAP (T9279D30
15Apr95 a04AAA)
*Default CharMap Name .... FRENCH
Default CharMap Note .... Translation Tables for French
CharMap File Contains Following Maps:
CharMap Name ......EUROPEAN
CharMap Note ..... ISO 8859/1 to IBM EBCDIC International 5
CharMap Name ......SPANISH
CharMap Note ..... Translation tables for Spanish
CharMap Name.......AUSTRIANGERMAN
CharMap Note...... Translation tables for Austrian and
German
CharMap Name...... BELGIANSWISS
CharMap Note...... Translation tables for Belgian and Swiss
CharMap Name...... CANADIANUSA
CharMap Note...... Translation tables for Canada and USA
CharMap Name...... DANISHNORWEGIAN
CharMap Note..... Translation tables for Danish and
Norwegian
CharMap Name...... FINNISHSWEDISH
CharMap Note...... Translation tables for Finnish and
Swedish
CharMap Name...... FRENCH
CharMap Note...... Translation tables for French
CharMap Name...... ITALIAN
CharMap Note...... Translation tables for Italian
CharMap Name...... UNITEDKINGDOM
CharMap Note...... Translation tables for the United Kingdom
Note. Attributes marked with an asterisk (
*
) can be altered using the ALTER command.