SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-52
INFO PROCESS Command
MaxInRUSize
displays the maximum number of bytes allowed in an incoming request/response
unit (RU). The number displayed is the process-wide default; individual
PTNR-MODE objects may have different values.
MaxApplIoSize
displays the maximum number of bytes that the SNAX/APC application can send to
or receive from the SNAX/APC process (that is, the maximum size of an IPC
message).
OneStepRead
displays whether one step reads are used. If the value OFF is displayed,
SNAX/APC uses the two-step read method when reading data from the underlying
access method (such as SNAX/APN or SNAX/XF).
SecurityManager
displays the name of the Tandem subsystem that handles the definition and storage
of security information and the enforcement of the security rules for SNAX/APC.
Backup Debug
displays whether a backup process will enter the debug mode or not.
EMS Suppression
displays whether the collection of EMS events for certain object types has been
suppressed. The hexadecimal bit masked display and equivalent object types are:
The suppression of EMS events for more than one object type is represented by the
sum of the objects’ hexadecimal representations. For example, when EMS events
for the LU and SESSION objects are suppressed, %H4800 is displayed. The value
%H0000 indicates that event suppression has not been specified for any objects.
Display Object Type
%H4000 LU
%H2000 PTNR-LU
%H1000 PTNR-MODE
%H0800 SESSION
%H0400 TPN
%H0200 TPI
%H0100 CONV