SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-54
INFO PROCESS Command
Log File Name
displays the name of the device or file to which SNAX/APC log output goes.
Configuration File Name
displays the name of the file that contains the SNAX/APC configuration
information. This is the file specified in the SNAX/APC CONFIG startup
parameter, or the temporary file created by SNAX/APC if the CONFIG parameter
was not specified in the RUN command or on a ALTER PROCESS command.
Program File Name
displays the name of the object file that is currently being executed as the
SNAX/APC process.
File Last Modif
displays the date upon which the program currently being executed as the
SNAX/APC process was last modified.
Library File Name
identifies the user library bound with SNAX/APC. Under normal usage, this field
should contain N/A.
Library File Last Modif
displays the date that the user library was last modified. Under normal usage, this
field should contain N/A.
Buffer Swap Volume
displays the name of the disk volume on which the data space (stack space) is
swapped.
Memory Swap Volume
displays the name of the disk volume being used by the swapping volume for
general memory (extended memory).
CharMap File Name
displays the name of the file that contains the character translation tables. N/A is
displayed if character translation is not used.
CharMap File Last Modif
displays the modification timestamp of the character map translation file.