SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-55
INFO PTNR-LU Command
CharMap File Banner
displays the version banner information of the current character map translation file.
A value is displayed under this heading only if the character map file is specified at
SNAX/APC startup.
Default CharMap Name
displays the name of the default character map name.
Default CharMap Note
displays a description of the character translation table.
CharMap Name
displays the name of each of the character maps in the character map file.
CharMap Note
displays a description of each character translation table.
INFO PTNR-LU Command
The INFO PTNR-LU command displays the current attribute settings of the specified
PTNR-LU object.
INFO PTNR-LU Nondetailed Display
This example shows the request for nondetailed information about the PTNR-LU named
LUS:
-> INFO PTNR-LU $AP01.LUP.LUS
The following display is returned in response to this request:
PTNR-LU Name
is the name of the partner LU.
SNAName
is the name of the partner LU as it is known in the SNA network. Note that the
object name partner-lu is the name by which the LU is known to the Tandem
SNAX/APC INFO PTNR-LU:
PTNR-LU Name *SNAName *Peripheral *Parallel
Node Sess-LU
-------------------------------------------------------------
$AP01.LUP.LUS LUS NO YES
Note. Attributes marked with an asterisk (
*
) can be altered using the ALTER command.