SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-64
INFO SESSION Command
Max In Ru Size
displays the default and current maximum sizes of an incoming request/response
unit (RU). The current value is established during the session’s BIND process.
Max Out Ru Size
displays the default and current maximum number of bytes in the outgoing
request/response unit (RU). The current value is established during the session’s
BIND process.
Rcv Pacing Window
displays the number of request/response units (RUs) that SNAX/APC can receive
from the partner LU at one time. The partner LU will not send more RUs to
SNAX/APC until SNAX/APC sends a pacing response indicating that it can receive
another pacing window.
Send Pacing Window
displays the number of request/response units (RUs) that SNAX/APC can send to
the partner LU at one time. SNAX/APC will not send more RUs to the partner LU
until the partner LU sends a pacing response indicating that it can receive another
pacing window.
Session
displays the role of the local LU in this session. Display values are either Primary or
Secondary.
Polarity
displays whether this LU is the bidder or the first speaker of the current session.
Sync Level Support
indicates the supported synchronization level of the active conversation. This field
contains None if a synchronization level is not supported, Confirm if the Confirm
synchronization level is supported or Syncpt if the Syncpt synchronization level is
supported. When SNAX/APC receives a BIND request for an LU-LU session, it
saves the accompanying synchronization-level information. The synchronization
level specified in ALLOCATE or MC_ALLOCATE must not be greater than the one
received with the BIND
Conversation ID
identifies the current conversation running in this session.
Conversation Type
identifies the type of the conversation (basic or mapped) that is currently using this
session.