SNAX/APC Configuration and Management Manual

About This Manual
SNAX/APC Configuration and Management Manual—138787
xxv
Availability Information in Tandem Manuals
SNAX/APN Manuals (D-series Software)
•
SNAX/APN Configuration and Control Manual
•
SNAX/APN Management Programming Manual
•
SCF Reference Manual for SNAX/APN
SNAX/XF Manuals (D-series Software)
•
SNAX/XF Configuration and Control Manual
•
SNAX/XF Management Programming Manual
•
SCF Reference Manual for SNAX/XF
Combined Manuals (G-series Software)
•
SNAX/XF and SNAX/APN Configuration and Control Manual
•
SCF Reference Manual for SNAX/XF and SNAX/APN
SNAX/CDF Manuals
•
SNAX/CDF Configuration and Control Manual
•
SNAX/CDF Management Programming Manual
•
SCF Reference Manual for SNAX/CDF
General Manuals
The Introduction to SNA Capabilities of Tandem NonStop Systems provides information
about the various products and solutions that Tandem offers for interfacing with IBM
Systems Network Architecture (SNA) networks.
Availability Information in Tandem Manuals
Tandem provides several manuals which address issues of availability. Availability
refers to end-user availability—that is, the amount of time an application running on a
Tandem system can be used effectively by a user of that application. The following list
describes Tandem manuals that contain information about automation, performance
management, problem management, change management, security management and
other availability topics:
•
Introduction to NonStop Operations Management provides automation, performance
management, change management, problem management, and security management
information.
•
Availability Guide for Change Management provides information about typical
changes and their causes, how to change a NonStop system while it is operational,
and how to reduce the time required for planned outages. This manual also includes
an overview of Tandem’s online change tools.