SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-66
INFO TPN Command
The following display is returned in response to this request:
Resource ID
displays in hexadecimal digits the identifier used by SNAX/APC to identify the
conversation and its resources.
Local TP Process Name
identifies the name of the process in which this transaction program instance is
running.
Originated
identifies whether the TPI was originated at the local LU or the remote LU.
Local Attach Indicator
displays YES if the transaction program (TP) server initiates an ATTACH request to
the local SNAX/APC process, and NO if the local TP receives an ATTACH request
from a remote TP. NO is always displayed when TP-READY is initiated by a
DISPATCH-TP request.
Dispatched Indicator
displays YES when the TP-READY request was initiated by a DISPATCH-TP
request, and NO when the TP was not dispatched. NO is always displayed when the
Local Attach Indicator displays YES.
INFO TPN Command
The INFO TPN command displays the current attribute settings of the specified
transaction program.
INFO TPN Nondetailed Display
This example shows the request for nondetailed information about the current
conversation:
-> INFO TPN $AP01.LUP.*
SNAX/APC DETAILED INFO TPI: $APC1.LU01.ACCT.003A
Resource ID ...................... %H003A 0000 EC83
Local TP Process Name ............ \TSNA.$ACCT
Originated ....................... Local LU
Local Attach Indicator ........... YES
Dispatched Indicator ............. NO