SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-68
INFO TPN Command
RmtAttach Timer
specifies the amount of time in milliseconds that SNAX/APC will wait for a remote
TP-READY to arrive to satisfy an ATTACH
INFO TPN Detailed Display
This example shows the request for detailed information about the transaction program:
-> INFO TPN $APC1.LU01.ACCT1
The following display is returned in response to this request:
GeneralTPReady
YES indicates that the transaction program supports the general TP-READY feature.
NO indicates that the transaction program does not support the general TP-READY
feature.
RemoteAttach
QUEUE indicates that the remote ATTACH requests designated to this transaction
program are queued if there are no outstanding remote-attached TP-READY
requests. (A remote-attached TP-READY request is a TP-READY verb with the
TP-LOCAL-ATTACH-INDICATOR set to N.)
REJECT indicates that the remote ATTACH requests designated to this transaction
program are rejected with sense data %H084B6031 (Transaction Program Not
Available–Retry Allowed) if there are no outstanding remote-attached TP-READY
requests.
CharMapping
YES indicates SNAX/APC performs character translation for all mapped
conversations subordinate to the target TPN. NO indicates SNAX/APC does not
perform character translation.
SNAX/APC DETAILED INFO TPN: $APC1.LU01.ACCT1
*GeneralTPReady ... NO *SessionControl ........ YES
*RemoteAttach ..... REJECT *RemoteAttachTimer ..... -1
*CharMapping ...... YES *SecurityRequired ......
USER
*ReplyDelayedOnError .. YES
*CharMap Name ......... ITALIAN
CharMap Note ......... Translation tables for Italian
Note. Attributes marked with an asterisk (
*
) can be altered using the ALTER command.