SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-80
STATS PROCESS Command
Bytes Rcvd
displays how many bytes of data have been received.
STATS PROCESS Command
The STATS PROCESS command displays the current statistical counters for a
SNAX/APC process.
This example requests statistical information about the process $APC1:
-> ASSUME PROCESS $APC1
-> STATS
The following display is returned in response to this request:
Sample Time
displays the date and time that the process statistics were gathered.
SNAX/APC STATS PROCESS: $APC1
Openers
-------------------------------------------------------------
--
Sample Time ........... 15 July 1990, 13:30:20.244
Reset Time ............ 15 July 1990, 08:01:11.455
Config Openers ........ 528 Current Openers ........ 3
Max Openers ........... 3
Receive Queue
-------------------------------------------------------------
--
Sample Time ........... 15 July 1990, 13:30:20.244
Reset Time ............ 15 July 1990, 13:30:20.244
Config RCV Depth ...... 2000 Current RCV Depth ...... 1
Max RCV Depth ......... 1
Memory Pool
-------------------------------------------------------------
--
Sample Time ........... 15 July 1990, 13:30:20.244
Reset Time ............ 15 July 1990, 13:30:20.244
Config MEM Pool ....... 83968 Current MEM Pool .......
72184
Max Allocated ........ 77068 Max Fragments .......... 36
Current Fragments ..... 12 Fail Size .............. 0
Growth Count .......... 1
Last Growth ........... 14 July 1990, 10:23:54.275