SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-82
STATS PTNR-MODE Command
Max Fragments
displays the maximum number of fragments in the memory pool since the last reset.
Current Fragments
displays the number of fragments currently in the memory pool.
Fail Size
displays the number of bytes of the last request for memory that failed. This value is
0 (zero) if no requests have failed.
Growth Count
displays the number of times the memory pool was increased due to storage
pressure.
Last Growth
displays the time when the memory pool was last increased.
STATS PTNR-MODE Command
The STATS PTNR-MODE command displays the current statistical counters for the
specified partner mode. Included in this display are counters showing the number of
times that various CNOS verbs have been processed.
This example requests statistical information about the partner mode named
LU62BIND:
-> ASSUME PROCESS $APC1
-> STATS PTNR-MODE LU01.CICSLU62.LU62BIND
The following display is returned in response to this request:
Sample Time
displays the date and time of the statistics sampling.
SNAX/APC STATS PTNR-MODE: $APC1.LU01.CICSLU62.LU62BIND
Sample Time ....... 15 July 1990, 13:40:20.244
Reset Time ........ 15 July 1990, 08:01:23.455
CNOS Verbs Processed:
---------------------------------------------------------
Initialize_Session_Limit .................... 20
Change_Session_Limit ........................ 354
Reset_Session_Limit ......................... 26
Process_Session_Limit <Remote CNOS Cmds> .... 234