SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-83
STATS SESSION Command
Reset Time
displays the date and time that the statistics counters were last reset by either a
system startup or STATS RESET command.
CNOS Verbs Processed
displays how many times the CNOS verbs INITIALIZE_SESSION_LIMIT,
CHANGE_SESSION_LIMIT, RESET_SESSION_LIMIT, and
PROCESS_SESSION_LIMIT have been processed by SNAX/APC. (For a
description of the CNOS verbs, refer to the IBM Transaction Programmer’s
Reference Manual for LU Type 6.2.)
STATS SESSION Command
The STATS SESSION command displays the current statistical counters for the target
session. Included in this display are counters showing the number of times various
conversation verbs have been processed. The SUB parameter is not valid with the
STATS SESSION command.
This example requests statistical information about the session named 013A:
-> ASSUME PROCESS $APC1
-> STATS SESSION LU01.CICSLU62.LU62BIND.013A
The following display is returned in response to this request:
Sample Time
displays the date and time of the statistics sampling.
SNAX/APC STATS SESSION: $APC1.LU01.CICSLU62.LU62BIND.013A
Sample Time ....... 15 July 1990, 13:40:20.244
Reset Time ........ 15 July 1990, 08:01:23.455
Conversation Verbs Processed
-------------------------------------------------------------
Allocate ........... 231 MC_Allocate ........... 0
Confirm ............ 211 MC_Confirm ............ 0
Confirmed .......... 134 MC_Confirmed .......... 0
Deallocate ......... 230 MC_Deallocate ......... 0
Get_Attribute ...... 145 MC_Get_Attribute ...... 0
Receive_And_Wait ... 1356 MC_Receive_And_Wait ... 0
Request_To_Send .... 123 MC_Request_To_Send .... 0
Send_Data .......... 1657 MC_Send_Data .......... 0
Send_Error ......... 0 MC_Send_Error ......... 0
Prep_To_Receive .... 0 MC_Prep_To_Receive .... 0
Receive_Immediate .. 0 MC_Receive_Immediate .. 0
Flush .............. 321 MC_Flush .............. 0
Get Tp Properties... 0