SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-84
STATUS Command
Reset Time
displays the date and time that the statistics counters were last reset.
Conversation Verbs Processed
displays how many times various conversation verbs have been processed during
this session. (For a description of the conversation verbs, refer to the IBM
Transaction Programmer’s Reference Manual for LU Type 6.2.)
STATUS Command
The STATUS command displays current status information for the specified objects.
STATUS is a nonsensitive command.
Command Syntax
The SNAX/APC STATUS command has the following syntax:
Object Specification
The object specification for the SNAX/APC STATUS command is:
Consideration
•
The STATUS command displays dynamic information about an object, such as its
current summary state. To display configuration information about an object’s
attributes and their values, use the INFO command.
•
The STATUS CONV and STATUS SESSION commands do not support the SUB
parameter.
STATUS [ object-spec ] [ , DETAIL]
[ , SEL [ NOT ] summary-state ]
[ , SUB [ subtype ] ]
object-type object name representation
CONV conv-id
LU local-lu
PROCESS apc-process
PTNR-LU partner-lu
PTNR-MODE partner-mode
SESSION session-id
TPI tpi
TPN tpn