SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-86
STATUS LU Command
Reset
Send
Receive
Receive Confirm
Receive Confirm Send
Receive Confirm Deallocate
Prepare to Receive Defer
Deallocate Defer
Pending Deallocate
End Conversation
Received Bytes Not Read
displays the number of bytes that have been received by the local LU but have not
yet been read by a transaction program. If this value is greater than the value of the
MAXAPPLIOSIZE attribute (which is displayed by the INFO PROCESS
command), SNAX/APC does not send a pacing response to the partner LU. If this
value is greater than MAXAPPLIOSIZE, the transaction program must read a
sufficient number of bytes of data to make this value less than MAXAPPLIOSIZE,
which allows SNAX/APC to send a pacing response to the partner LU.
RUs To Be Sent
displays the number of RUs waiting to be sent to the partner LU.
Verb In Progress
displays the verb that SNAX/APC is processing for the conversation on this session.
If no conversation is active or no verb is currently being processed, None (0000) is
displayed.
STATUS LU Command
The STATUS LU command displays information about the current status of the
specified local LU.
Status LU Nondetailed Display
This example requests status information for the LU named LU01:
-> ASSUME PROCESS $APC1
-> STATUS LU LU01
The following display is returned in response to this request:
Note. For a description of FSM values, refer to the IBM LU 6.2 Reference Manual for Peer
Protocols.
SNAX/APC STATUS LU:
LU Name Sum State Trace State
----------------------------------------
$APC1.LU01 STARTED INACT