SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-87
STATUS LU Command
LU Name
displays the name of the LU.
Sum State
displays the current summary state of the LU object. Valid summary states are
STARTING, STOPPED, and STARTED.
Trace State
displays the current state of trace activity for this LU. Valid trace states are
ACTIVE and INACT (inactive).
Status LU Detailed Display
This example requests detailed status information for the LU named LU01:
-> ASSUME PROCESS $APC1
-> STATUS LU LU01, DETAIL
The following display is returned in response to this request:
Sum State
displays the current summary state of the LU object. Valid summary states are
STARTING, STARTED, and STOPPED.
Trace State
displays the current state of trace activity for this LU. Valid trace states are
ACTIVE and INACT (inactive).
SNAX Retry Count
displays the number of times that SNAX/APC has attempted the open request.
Trace File Name
displays the name of the trace file, if tracing is active.
Session Count
displays the number of currently active sessions.
SNAX/APC DETAILED STATUS LU: $APC1.LU01
Sum State ........ STARTED Session Count ..... 2
Trace State ...... ACTIVE Conversation Count 2
SNAX Retry Count . 2
Trace File Name ..............\TSNA.$FIELD.APCONFIG.TAPFILE1