SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-89
STATUS PROCESS Command
Config State
displays the configuration state of the process. INPROG indicates that configuration
is currently in progress, and you cannot issue sensitive commands. DONE indicates
that the configuration is available for updating, and you can issue sensitive
commands. ERROR indicates that SNAX/APC encountered an error while
updating the configuration database. SWITCH indicates that a configuration file
switch is in progress.
STATUS PROCESS Detailed Display
This example requests detailed status information about the process $APC1:
-> ASSUME PROCESS $APC1
-> STATUS, DETAIL
The following display is returned in response to this request:
Sum State
displays the current summary state of the PROCESS object. The only valid
summary state is STARTED.
Trace State
indicates the current state of trace activity for this process. Valid trace states are
ACTIVE and INACT (inactive).
Config State
displays the configuration state of the process. INPROG indicates that configuration
is currently in progress, and you cannot issue sensitive commands. DONE indicates
that the configuration is available for updating, and you can issue sensitive
commands. ERROR indicates that SNAX/APC encountered an error while
updating the configuration database. SWITCH indicates that a configuration file
switch is in progress.
Security Server Process
displays the process name of the security server process. N/A is displayed when Sec
Serv State is INACT.
SNAX/APC DETAILED STATUS PROCESS: $APC1
Sum State ....... STARTED Backup State ......... STARTED
Trace State ..... ACTIVE Log State ............ ACTIVE
Config State .... DONE Sec Serv State ....... ACTIVE
Security Server Process.....\TSNA.$Z059
Trace File Name.............\TSNA.$FIELD.APCONFIG.TAPFILE1