SNAX/APC Configuration and Management Manual

SCF Commands for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
8-93
STATUS SESSION Command
The following display is returned in response to this request:
Sum State
displays the current summary state of the SESSION object. Valid summary states
are STOPPING, STARTING, and STARTED.
Current Conversation ID
identifies the current conversation running on this session.
FSM-BIS
identifies the Bracket Initiation Stopped (BIS) protocol. The possible values are:
Reset
BIS Sent
BIS Received
Closed
FSM-BSM
indicates whether the session is currently in brackets or between brackets. The
possible values are:
SNAX/APC STATUS SESSION: $APC1.LU01.CICSLU62.LU62BIND.013A
Sum State..................... STARTED
Current Conversation ID ...... %H0012
FSM-BIS....................... Reset
FSM-BSM....................... In Brackets
FSM-CHAIN-RCV................. In Chains
FSM-CHAIN-SEND................ Between Chains
FSM-CONVERSATION.............. Receive
FSM-ERROR-OR-FAILURE.......... No Requests (initial state)
FSM-PAC-RQ-RCV................ Reset
FSM-PAC-RQ-SEND............... Reset
FSM-POST...................... Pending Posted
FSM-QRI-CHAIN-RCV............. Reset
FSM-RCB-STATUS................ In use
FSM-RCV-PURGE................. Reset
FSM-SCB-STATUS................ In Use
FSM-STATUS.................... Active
Pacing Count - Receive........ 00000
Pacing Count - Send........... 00000
Receive Bytes Not Read........ 00000
RUs To Be Sent................ 00000
Verb In Progress.............. Rcv. and Wait
Note. For a description of FSM values, refer to the IBM LU 6.2 Reference Manual for Peer
Protocols.