SNAX/APC Configuration and Management Manual

Base and Option Sets Supported by SNAX/APC

SNAX/APC Configuration and Management Manual—138787

A-2

In Table A-4, note that the CNOS and LU definition verbs cannot be issued by a TP, but

SNAX/APC can generate them through SPI and SCF. Session control verbs may be

issued by TPs. However, this practice is not recommended as LU session activation is

really a centralized function, not something that should be changed by individual TP

programmers who may have no idea if another TP needs to use the session afterwards.

Table A-2. Mapped Conversation Verbs

Verb Names Support in SNAX/APC

MC-ALLOCATE yes

MC-CONFIRM yes

MC-CONFIRMED yes

MC-DEALLOCATE yes

MC-FLUSH yes

MC-GET-ATTRIBUTES yes

MC-POST-ON-RECEIPT no

MC-PREPARE-FOR-SYNCPT no

MC-PREPARE-TO-RECEIVE yes

MC-RECEIVE-AND-WAIT yes

MC-RECEIVE-IMMEDIATE yes

MC-REQUEST-TO-SEND yes

MC-SEND-DATA yes

MC-SEND-ERROR yes

MC-TEST no

Table A-3. Type Independent Verbs

Verb Names Support in SNAX/APC

BACKOUT no

GET-TP-PROPERTIES yes

GET-TYPE yes

SET-SYNCPT-OPTIONS no